Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Stilo Factory Service Manual (2001-2007)22 · Fault diagnosis
22 · Diagnostics

Mil warning light does not work

Make
Fiat
Model
Stilo Factory Service Manual
Year
2001–2007
Section
Instrument panel › Mil warning light does not work
Fault diagnosisMil warning light does not work

MIL WARNING LIGHT DOES NOT WORK

With key on, the MIL warning light does not come on;

The MIL warning light is turned on via a direct earth control supplied by the engine control node. When everything is working normall, the MIL warning light should come on with the ignition on and go out once the engine has started;

Results of the tests
1CHECKING WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation

Connect the diagnostic equipment to the diagnostic socket and check the engine control node for:

  • MIL warning light operation via active diagnosis.
Continue to Step 4The warning light does not come onContinue to Step 2
2CHECKING WARNING LIGHT OPERATIONAll OKProblems metOperation
Check that the MIL warning light is working See Test 5560BT Check MIL warning light operationContinue to Step 4The warning light does not come onContinue to Step 3
3CHECKING ELECTRICAL EQUIPMENTAll OKProblems metOperation
Check the continuity and the insulation of the wires between the engine control node and the instrument panel node. See E4010 INSTRUMENT PANEL

Replace instrument panel

End of diagnosis

Cable brokenRenew the electrical connections See E4010 INSTRUMENT PANEL
4CHECKING CORRECT OPERATIONAll OKProblems metOperation

1.2 16v

1.6 16v

1.8 16v

2.4 20v

Check that the fault is no longer presentFault persists

Replace the engine management control unit Op. 1056B82

Search for the fault starting from another symptom'

1.9 JTD 8vCheck that the fault is no longer presentFault persists

Replace the engine management control unit Op. 1060G80

Search for the fault starting from another symptom'

Parts & tools for this job For 2001 Fiat Stilo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.