Doors open check not working
- Make
- Fiat
- Model
- Stilo Factory Service Manual
- Year
- 2001–2007
- Section
- Instrument panel › Doors open check not working
DOORS OPEN CHECK NOT WORKING
When one of the doors or the boot is opened the special message does not appear on the instrument panel; the interior lights come on normally when the doors are opened;
The doors open signal is made available by the 'body computer node' to the 'instrument panel node' via the B-CAN network.
| Results of the tests | ||||
| 0 | PRELIMINARY CHECK | All OK | Problems met | Operation |
|---|---|---|---|---|
Check that with the engine started up:
| Continue to Step 2 | The matrix displays other information | restore the standard screen | |
| Functions missing | Continue to Step 1 | |||
| Functions missing | Continue to Step 1 | |||
| 1 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
Connect the diagnostic equipment (Examiner or other instruments) Check the CAN network information:
| Continue to Step 2 | Presence of faults in the CAN network | Continue following the instructions for the diagnostic equipment | |
| 2 | CHECKING CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | Fault present | Replace instrument panel Op. 5560B11 Search for the fault starting from another symptom' | ||
Parts & tools for this job For 2001 Fiat Stilo
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Fiat touch up paint
- PARTPanel clip assortmentSearch: Fiat panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.