Displaying electric power steering fault on matrix
- Make
- Fiat
- Model
- Stilo Factory Service Manual
- Year
- 2001–2007
- Section
- Instrument panel › Displaying electric power steering fault on matrix
‹ Prev M.i.l warning light stays on / engine startsNext › Display fault code on matrix / engine starts
Fault diagnosisDisplaying electric power steering fault on matrix
DISPLAYING ELECTRIC POWER STEERING FAULT ON MATRIX
The Electric Steering Node communicates fault messages to the Instrument Panel Node on the C-CAN network and - via a gateway - on the B-CAN network.
Communication with the tester takes place via a K line.
| Results of the tests | ||||
| 1 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|---|---|---|---|
| Connect the tester and check the Electric Steering Node for faults | Continue to Step 2 | Faults in system | Continue according to the instructions for the diagnostic equipment | |
| 2 | CHECK CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | Fault persists | Replace instrument panel Op. 5560B11 Search for the fault starting from another symptom' | |
‹ Prev M.i.l warning light stays on / engine startsNext › Display fault code on matrix / engine starts
Parts & tools for this job For 2001 Fiat Stilo
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Fiat power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.