CAUTION: Plug the connections. (page 3 of 3)

72. Disconnect the following multiplugs/connectors

73. Remove 2 cable ties securing harness to
74. Position jack to support engine sump.
75. Remove 2 remaining bell housing to engine
76. With assistance, lower transmission and engine
64. Remove 2 nuts and bolts securing heat shield to
77. Separate transmission from engine and lower on

transfer box LH mounting bracket.

65. Remove heat shield.
78. Remove transmission assembly from beneath
66. Remove 3 nuts and bolts securing transfer box LH mounting bracket to chassis.
79. Position lifting eyes to transmission and secure
67. Release earth lead from fixing.
80. Fit lifting chains to eyes and connect.
81. Position lifting hoist and connect lifting chains.
82. Raise hoist until chains are taught.

83. Remove bolts securing cradle to transfer box.
84. Raise transmission from cradle.
85. Refit transfer box rear cover plate bolts.
86. Lower transmission assembly onto work bench.
87. Disconnect lifting chains from eyes.
88. Remove bolts securing eyes to transmission and

Refit

89. Position lifting eyes to transmission and secure
90. Connect lifting chains to eyes.
91. Raise transmission assembly from bench and
92. Remove 2 transfer box rear cover plate bolts.
68. Remove nut securing transfer box RH mounting.
93. Lower transmission onto cradle, align to transfer
69. Remove 3 nuts and bolts securing transfer box RH mounting bracket to chassis.
70. Remove transfer box RH mounting bracket and
94. Lower hoist and disconnect lifting chains from

collect flexible mount heat shield.

71. Lower transmission on jack to access harness
95. Remove chains from hoist.

connectors.

96. Remove bolts securing lifting eyes to

from transfer box: Speed transducer Parking solenoid Neutral detection switch Differential lock Temperature sensor switch

transfer box.

CAUTION: Use a block of wood or hard rubber pad to protect sump.

bolts.

jacks until hi-low selector lever is clear of transmission tunnel aperture.

jack.

ramp.

with bolts.

remove eyes.

with bolts.

position above transmission cradle.

box rear cover plate and secure with previously removed bolts.

eyes.

transmission and remove eyes.