TD5 Defender
82
AIR CONDITIONING
2
REPAIR
MOTOR - CONDENSER FAN
Service repair no - 82.15.01
Remove
1. Remove 6 screws and remove radiator grille.
2. Disconnect fan multiplug and release multiplug
holder from retaining clip.
3. With assistance remove 4 nuts and bolts
securing motor to condenser.
4. Remove motor.
Refit
5. Position motor to condenser and with assistance
tighten nuts and bolts to 8 Nm (6 lbf.ft) .
6. Connect motor multiplug.
7. Position radiator grille and secure with screws.
RECEIVER DRIER
Service repair no - 82.17.03
Remove
1. Recover refrigerant from A/C system. See
Adjustment.
2. Remove 2 bolts securing pipe unions to receiver
drier.
3. Release pipes and discard ’O’ rings.
CAUTION: Immediately cap all air
conditioning pipes to prevent ingress of
dirt and moisture into the system.
4. Remove 2 bolts securing receiver drier mounting
bracket to chassis.
5. Remove receiver drier, slacken clamp bolt and
remove bracket.