TD5 Defender
MANUAL GEARBOX
1
REPAIR
COVER - FRONT - RESEAL AND FIT NEW INPUT
SHAFT OIL SEAL
Service repair no - 37.12.33.01
Remove
1. Remove gearbox. See this Section.
2. Remove retaining peg and remove release
bearing.
3. Remove bolt securing clutch release fork,
remove retaining clip and remove clutch release
fork.
4. Remove 2 bolts securing release bearing sleeve,
remove bearing sleeve.
5. Remove 6 bolts securing clutch housing, remove
housing.
6. Remove and discard 6 bolts securing front
cover, remove cover.