TD5 Defender
MANUAL GEARBOX
7
REPAIR
GEARBOX
Service repair no - 37.20.02.99
Remove
1. Disconnect battery negative lead.
2. Remove gear lever and transfer gearbox lever
knobs.
3. Remove gearbox tunnel carpet.
4. Remove gear lever cover.
5. Remove nut and washer securing gear lever to
lower splined lever.
6. Mark gear lever spline setting to lower lever and
remove lever.
7. Release and remove insulation pad from tunnel.
8. Remove trim stud and lift up handbrake gaiter for
access to clevis pin.
9. Remove split pin, clevis pin, washer and
disconnect cable from handbrake lever; discard
split pin.
10. Remove 2 bolts securing hand-brake lever to
body, disconnect Lucar and remove lever.
11. Remove 2 screws securing relay panel and
collect 2 spacers.