Discovery II
LIGHTING
86-2-2
ADJUSTMENTS
Headlamps beam alignment - from 03MY
$% 86.40.17
Check
1. Ensure vehicle is unladen and tyres are set at
the correct pressures.
2. Models with SLS: Ensure vehicle is at the
standard ride height.
3. Models without SLS: Set headlamp leveling
switch to zero.
4. Align beam setting equipment to headlamp.
5. Switch on headlamps. Headlamp setting 1.2%
below horizontal and parallel.
6. Align beam setting equipment to second
headlamp and repeat the check.
Adjust
1. Using a flat blade screwdriver rotate the
headlamp adjusters until correct alignment is
achieved
2. Rotate inboard adjuster for verticle alignment.
3. Rotate outboard adjuster for horizontal
alignment.
4. Adjust 2nd headlamp as detailed above.
5. Switch off headlamps and remove beam setting
equipment.