Workshop Manuals Factory service & repair Land Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K Series06 Engine - L Series07 Emission control08 Engine management system - MEMS09 Engine management system - EDC10 Fuel delivery system11 Cooling system - K Series12 Cooling system - L Series13 Manifold & exhaust systems14 Clutch15 Manual gearbox - PG116 Transfer box - IRD17 Drive shafts18 Rear axle and final drive19 Steering20 Front suspension21 Rear suspension22 Brakes23 Restraint systems24 Body25 Heating & ventilation26 Air conditioning27 Wipers & washers28 Electrical29 Instruments
Land Rover Freelander Workshop Manual (1998-2000)24 · Body
24 · Body & interior

Mud flap - front

Make
Land Rover
Model
Freelander Workshop Manual
Year
1998–2000
Section
Exterior fittings › Mud flap - front
BodyMud flap - front

MUD FLAP - FRONT

Service repair no - 76.10.83

Remove

Mud flap - front – Service repair no - 76.10.83
  1. Turn steering wheel to full lock.
  2. Remove 3 screws securing mud flap.
  3. Remove mud flap.

Refit

  1. Position mud flap to body and secure with screws.
  2. Straighten steering.

MUD FLAP - REAR

Service repair no - 76.10.85

Remove

  1. Raise rear of vehicle.

WARNING: Support on safety stands.

  1. Remove road wheel(s).
Mud flap - rear – Remove road wheel(s).
  1. Remove 3 screws securing mud flap.
  2. Remove mud flap.

Refit

  1. Position mud flap to body and secure with screws.

Parts & tools for this job For 1998 Land Rover Freelander

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.