Finisher - roof panel
- Make
- Land Rover
- Model
- Freelander Workshop Manual
- Year
- 1998–2000
- Section
- Exterior fittings › Finisher - roof panel
BodyFinisher - roof panel · page 1 of 2
FINISHER - ROOF PANEL
Service repair no - 76.43.68
Remove
- Remove tail door glass side finisher. See Doors.
- Remove roof finisher caps or, if roof rack fitted, remove side rail. See this section.
- Using a suitable hooked tool in the front foot hole of the roof finisher, slide the finisher’s 2 forward clips rearward from the roof channel.
- Slide the clip rear of the foot hole forward from the roof channel.
- Slide the remaining 7 clips from the roof channel.
- Remove nut securing rear end of roof finisher.
- Remove finisher.
Parts & tools for this job For 1998 Land Rover Freelander
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Land Rover touch up paint
- PARTPanel clip assortmentSearch: Land Rover panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.