Workshop Manuals Factory service & repair Land Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K Series06 Engine - L Series07 Emission control08 Engine management system - MEMS09 Engine management system - EDC10 Fuel delivery system11 Cooling system - K Series12 Cooling system - L Series13 Manifold & exhaust systems14 Clutch15 Manual gearbox - PG116 Transfer box - IRD17 Drive shafts18 Rear axle and final drive19 Steering20 Front suspension21 Rear suspension22 Brakes23 Restraint systems24 Body25 Heating & ventilation26 Air conditioning27 Wipers & washers28 Electrical29 Instruments
Land Rover Freelander Workshop Manual (1998-2000)14 · Clutch
14 · Transmission

All models.

Make
Land Rover
Model
Freelander Workshop Manual
Year
1998–2000
Section
Repairs › All models.
ClutchAll models.

All models.

All models.
  1. Release air cleaner from battery carrier and intake hose.
  2. Position air cleaner aside.
All models. – Position air cleaner aside.
  1. Remove ’C’ clip from slave cylinder and release cylinder from support bracket.
All models. – Remove ’C’ clip from slave cylinder and release cylinder from support bracket.
  1. Carefully cut cable tie, release main harness and position aside.
  2. Remove and discard cable tie.
All models. – Remove and discard cable tie.
  1. Release master cylinder push rod from clutch pedal.

Parts & tools for this job For 1998 Land Rover Freelander

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.