Workshop Manuals Factory service & repair Land Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K Series06 Engine - L Series07 Emission control08 Engine management system - MEMS09 Engine management system - EDC10 Fuel delivery system11 Cooling system - K Series12 Cooling system - L Series13 Manifold & exhaust systems14 Clutch15 Manual gearbox - PG116 Transfer box - IRD17 Drive shafts18 Rear axle and final drive19 Steering20 Front suspension21 Rear suspension22 Brakes23 Restraint systems24 Body25 Heating & ventilation26 Air conditioning27 Wipers & washers28 Electrical29 Instruments
Land Rover Freelander Workshop Manual (1998-2000)29 · Instruments
29 · Electrical

Transmitter - coolant temperature gauge - ’l’ series

Make
Land Rover
Model
Freelander Workshop Manual
Year
1998–2000
Section
Repairs › Transmitter - coolant temperature gauge - ’l’ series
InstrumentsTransmitter - coolant temperature gauge - ’l’ series

TRANSMITTER - COOLANT TEMPERATURE GAUGE - ’L’ SERIES

Service repair no - 88.25.20

Remove

Transmitter - coolant temperature gauge - ’l’ series – Service repair no - 88.25.20
  1. Disconnect coolant temperature gauge transmitter lead from engine harness.

Models with air conditioning

  1. Remove alternator. See ELECTRICAL, Repairs.

All models

  1. Position drain tin to collect spillage.
  2. Remove coolant temperature gauge transmitter.

Refit

  1. Clean threads of coolant temperature gauge transmitter.
  2. Apply Loctite 577 to threads of coolant temperature gauge transmitter.
  3. Fit coolant temperature gauge transmitter and tighten to 10 Nm.
  4. Connect lead to engine harness
  5. Top-up coolant. See INFORMATION, Capacities, fluids and lubricants.

Models with air conditioning

  1. Fit alternator. See ELECTRICAL, Repairs.

Parts & tools for this job For 1998 Land Rover Freelander

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.