Stoplamp Switch Removal
- Make
- Land Rover
- Model
- Discovery LR3/Disco 3
- Section
- Stoplamp Switch Removal
417-07 Exterior LightingStoplamp Switch Removal · page 1 of 2
Stoplamp Switch (70.35.42)
Removal
Installation
Published : May 14, 2004
CAUTION: The brake pedal MUST NOT be depressed during this operation. Failure to comply will result
in damage to the stoplamp switch.
1 .
Remove the closing trim panel.
Release the clip.
Remove the 2 screws.
Disconnect the electrical connector.
2 .
Remove the stoplamp switch.
Disconnect the electrical connector.
Rotate the switch clockwise.
1 .
CAUTION: The brake pedal MUST NOT be depressed during this operation. Failure to comply
will result in damage to the stoplamp switch.
Pinch or Ctrl + scroll to zoom. Double-tap to reset.
Parts & tools for this job For Land Rover Discovery
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.