Range Rover P38
GENERAL SPECIFICATION DATA
9
INFORMATION
Lubrication
System
Wet sump, pressure fed
.............................................................................
Oil pressure, at idle
2.0 bar
..........................................................
29.0 lbf/in
2
Regulated pressure
3.8 bar
..........................................................
55.0 lbf/in
2
Oil pump:
Type
Internal gear type pump, mounted on front of engine
........................................................................
Drive
Direct from crankshaft
........................................................................
Radial clearance:
Inner rotor/bearing sleeve (max.)
0.065 mm
.....................................
0.003 in
Outer rotor/pump body (max.)
0.4 mm
..........................................
0.02 in
Axial clearance:
Inner rotor/pump body
0.065 mm
......................................................
0.003 in
Outer rotor/pump body
0.070 mm
.....................................................
0.004 in
Oil pressure relief valve
piston operated, non-adjustable
....................................................
Relief valve spring:
Length relaxed
84.10 mm
........................................................
3.3 in
Oil filter
Disposable cartridge
.............................................................................
Engine oil cooler
Mounted on front of coolant radiator
...............................................................