landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

UNDER BONNET MAINTENANCE|Page 159 > < UNDER BONNET MAINTENANCE
Page 93
background image

10

MAINTENANCE

NEW RANGE ROVER

4

MAINTENANCE

RENEW FUEL FILTER ELEMENT (DIESEL)

Renew fuel filter.

See FUEL SYSTEM, Repair.

DRAIN WATER FROM FUEL FILTER (DIESEL)

RENEW AIR FILTER ELEMENT AND CLEAN
DRAIN HOLE (DIESEL)

RENEW AIR FILTER ELEMENT AND CLEAN
DRAIN HOLE (V8)

1. Release 4 clips, lift air cleaner cover.
2. Remove air filter element.
3. Fit new element ensuring it locates correctly in

air cleaner body.

RENEW POLLEN FILTERS

Renew pollen filters.

See HEATING AND

VENTILATION, Repair.

RENEW EVAP CANISTER, CHECK EVAPORATIVE
LOSS SYSTEM AND FILLER CAP SEAL (V8)

Renew EVAP canister.

See EMISSION CONTROL,

Repair.

CHECK CONDITION OF ANCILLARY DRIVE
BELT/S (poly V)

Renew drive belts if damaged.

RENEW ANCILLARY DRIVE BELT (POLY V)

Alternator Drive Belt - Renew.

See ELECTRICAL,

Repair.

CHECK/TOP UP AUTOMATIC TRANSMISSION
FLUID - up to 99MY

CAUTION: When replacing the dipstick,
ensure that the handle lugs fully engage
with tube.

NOTE: Check the fluid level only when the
engine and gearbox are cold.

1. Ensure vehicle is level, then select ’P’ (park) and

start the engine.

2. With the engine running at idle speed and both

footbrake and hand brake applied, move the
selector lever to position ’1’ and then back to
position ’P’.

3. Still with the engine running remove dipstick,

wipe using lint free cloth.

4. Reinsert the dipstick fully and withdraw again to

check the level.

5. Check fluid level registers between MAX and

MIN marking on dipstick. For fluid
recommendations.

See LUBRICANTS, FLUIDS

AND CAPACITIES, Information.

CHECK/TOP UP AUTOMATIC TRANSMISSION
FLUID - from 99MY

1. Refer to gearbox drain and refill procedure.

See

AUTOMATIC GEARBOX, Repair.

UNDER BONNET MAINTENANCE|Page 159 > < UNDER BONNET MAINTENANCE