Range Rover P38
76
CHASSIS AND BODY
NEW RANGE ROVER
2
ADJUSTMENT
SUNROOF - PANEL
Service repair no - 76.82.04
Adjust
1. Slide back sunshade.
2. Tilt sunroof panel.
3. Remove mechanism covers.
See Repair.
4. Close sunroof panel.
5. Slacken 4 Torx screws, securing mechanism to
sunroof panel.
6. Align sunroof panel to aperture in roof.
7. Position leading edge of sunroof panel so that it
is flush or not more than 0.5 mm lower than roof
outer surface.
8. Position trailing edge of sunroof panel so that it
is flush or not more than 0.5 mm higher than roof
outer surface.
9. Hold in position and torque tighten Torx screws
to
6 Nm (4.5 lbf.ft).
10. Tilt sunroof panel.
11. Fit mechanism covers.
12. Close sunroof panel.