Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)06 · Suspension
06 · Steering & suspension

Caliper removal note

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Rear Suspension › Caliper removal note
SuspensionCaliper removal note
SUSPENSION – Rear Suspension – figure
Fig. 2: Identifying Rear Shock Absorber & Coil Spring (With Torque Specifications)
Courtesy of MAZDA MOTORS CORP.

CALIPER REMOVAL NOTE

  1. Remove the caliper, and hang the cable out of the way.

REAR SHOCK ABSORBER AND COIL SPRING DISASSEMBLY/ASSEMBLY

WARNING: Removing/installing the shock absorber and coil spring is dangerous. The shock absorber and coil spring could fly off and cause injury or death, and damage the vehicle.

  1. Remove the rear shock absorber and coil spring. (See REAR SHOCK ABSORBER AND COIL SPRING REMOVAL/INSTALLATION .)
  2. Remove in the order indicated in Fig. 3 .
  3. Install in the reverse order of removal.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.