Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)04 · Transmission
04 · Transmission

Flywheel inspection (page 2 of 3)

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Clutch
TransmissionFlywheel inspection · page 2 of 3
TRANSMISSION – Clutch – figure
Fig. 32: Correcting Slight Scratches Using Sandpaper
Courtesy of MAZDA MOTORS CORP.
  1. Inspect the surface that contacts the clutch disc for scratches, nicks, and discoloration.
  2. Inspect the ring gear teeth for damage and wear.
  3. Install the flywheel.
  4. Measure the runout of the surface that contacts the clutch disc using a dial gauge.

Flywheel maximum runout

0.1 mm {0.004 in}

  • If it exceeds the maximum specification, replace the flywheel.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.