Backlight (page 2 of 2)
- Make
- MG
- Model
- MGF Body Repair Manual
- Year
- 1995–2000
- Section
- Hood
BodyBacklight · page 2 of 2
- Remove 2 rivets securing ends of hood rear quarter retaining strips.
- Carefully bend back ends of strips to reveal rivets.
- Drill out 13 pop rivets securing backlight retaining strip.
- Collect retaining strip and remove backlight.
- Release felt covering from 3rd hood bow.
- Remove 7 nuts securing outer cover clamp rail.
- Partially lower hood frame.
- Release clamp rail studs from hood frame.
- Lay protective sheet over backlight, luggage compartment lid and seats.
- Release foam from ends of zip retainer to reveal pop rivets.
- With assistance to hold outer cover aside, drill out 9 pop rivets securing zip retainer to hood frame.
- Remove backlight zip.
Parts & tools for this job For 1995 MG MGF
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: MG touch up paint
- PARTPanel clip assortmentSearch: MG panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.