Workshop Manuals Factory service & repair MG
01 Introduction02 General information03 General data, torque settings and capacities04 Maintenance05 Engine (K Series)06 Engine management (MEMS 3), fuel and emission systems07 Cooling system08 Manifolds and exhaust system09 Clutch10 Manual gearbox11 Automatic gearbox (Stepspeed Em-CVT)12 Drive shafts13 Steering14 Front suspension15 Rear suspension16 Brakes17 Restraint systems (SRS)18 Body19 Heating and ventilation20 Air conditioning21 Wipers and washers22 Electrical23 Instruments
MG TF Factory Workshop Manual (2002-2005)16 · Brakes
16 · Brakes

Brake light switch

Make
MG
Model
TF Factory Workshop Manual
Year
2002–2005
Section
Repairs › Brake light switch
BrakesBrake light switch

BRAKE LIGHT SWITCH

Service repair no - 70.35.42

Remove

Brake light switch – Service repair no - 70.35.42
  1. Release 2 Lucar connectors from switch.
  2. Release bayonet fixing and remove switch.

Refit

  1. Fit switch to pedal box.
  2. Connect Lucar connectors.
  3. Adjust switch. See Adjustments.

BRAKE PADS - FRONT - STANDARD

Service repair no - 70.40.02

Remove

  1. Raise front of vehicle.

WARNING: Support on safety stands.

  1. Remove road wheel(s).
Brake pads - front - standard – Remove road wheel(s).
  1. Remove lower guide pin bolt from caliper and pivot caliper body upwards.
  2. Remove 2 brake pads from caliper carrier.

Parts & tools for this job For 2002 MG TF

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.