Workshop Manuals Factory service & repair Nissan and Datsun
01 cover02 A (intro)03 B (CA18DET/ECCS)04 C (driveline)05 D (body & frame)06 E (interior electric)07 F (misc. codes)08 manual notes09 Front cover10 CONTENTS11 GI General information12 MA maintenance13 EM engine mechanical14 LC lubrication & cooling15 EF &EC engine fuel & emission control system16 FE engine control fuel & exhaust systems17 CL clutch18 MT manual transmission19 AT automatic transmission20 PD prop shaft & diff carrier21 FA front axle & suspension22 RA rear axle & suspension23 BR brake system24 ST steering25 BF body26 HA heater & aircon27 EL electrical system
Nissan and Datsun Nissan 180SX S13 1989 Workshop Manual23 · BR brake system
23 · Brakes

CHECK AND ADJUSTMENT - Nissan 180SX S13 Workshop Manual

Make
Nissan and Datsun
Model
180SX Nissan 180SX S13 1989 Workshop Manual
Section
General › CHECK AND ADJUSTMENT - Nissan 180SX S13 Workshop Manual
BR brake systemCHECK AND ADJUSTMENT - Nissan 180SX S13 Workshop Manual

CHECK AND ADJUSTMENT

CHECK AND ADJUSTMENT

Checking Brake Fluid Level

MUTT UUTy

@ Check fluid level in reservoir tank. It should be between Max. and Min. lines on reservoir tank. @ If fluid level is extrernely low, check brake system for leaks.

Checking Brake System

@ Check brake lines (tubes and hoses) for cracks, deteriora- tion or other damage. Replace any damaged parts. if leakage occurs around joints, retighten or, if necessary, replace damaged parts. @ Check for oil leakage by fully depressing brake pedal.

SMAT32A ass, Changing Brake Fluid Drain brake fluid in each air bleeder valve.

1. Refill until new brake fluid comes out of each air bleeder

2. valve. Use same procedure as in bleeding hydraulic system to refill brake fluid. Refer to Bleeding Procedure. Refill with recommended brake fluid “DOT 3”. Never reuse drained brake fluid. Be careful not to splash brake fluid on painted areas. SBRS92

BR-3

Parts & tools for this job For Nissan 180SX

As an Amazon Associate we earn from qualifying purchases.