TROUBLE DIAGNOSES - Nissan 180SX S13 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 180SX Nissan 180SX S13 1989 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 180SX S13 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Diagnostic Procedure 9 Control unit connector ACTUATOR MOTOR RELAY (L.E.D. flashing number 9)
INSPECTION START
Remove battery negative terminal connector. 4 f®)
CHECK MOTOR RELAY
NG. Disconnect actuator connector.
SOLENOID RESISTANCE.
Check resistance between SB8R1728 Disconnect control unit con- actuator connector (actuator
Actuator connector
Bs nector. side) terminals (@ and (). 2) (SCONMELT Check resistance between con- Resistance: 38 - 450) trol unit connector (vehicle side)
terminals @P and @8.
pow y NG. Resistance: 38 - 450. : Repair harness Replace BI}
0.K. between motor ~ actuator and relay.
CHECK MOTOR RELAY
control unit. DEACTIVATION. Disconnect actuator connector. SBR5484 Check continuity between actuator connector (actuator side) terminals @ and (0. { Yes No Replace motor relay.
|
Check if motor’s fusible link
No »| Perform Electrical Components
is blown. Inspection — ACTUATOR. Resistance: (See page BR-60.) Approximately 00 N.G. O.K, . Z v Yes Replace Replace ¥ control unit. actuator. Replace fusible link. DISCONMECT
SBASSIA
BR-56
Parts & tools for this job For Nissan 180SX
- PARTBrake padsSearch: Nissan 180SX brake pads
- TOOLBrake bleeder kitSearch: one man brake bleeder kit
- FLUIDBrake fluidSearch: brake fluid
As an Amazon Associate we earn from qualifying purchases.