CYLINDER BODY - Nissan 180SX S13 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 180SX Nissan 180SX S13 1989 Workshop Manual
- Section
- General › CYLINDER BODY - Nissan 180SX S13 Workshop Manual
CYLINDER BODY
REAR DISC BRAKE (CL9H) — Caliper Disassembly (Cont'd)
4. Remove return spring and lever.
SBRB877 Inspection
CYLINDER BODY
@ Check inside surface of cylinder for score, rust, wear or other damage. @ Minor damage from rust of foreign materials may be elimi- nated by polishing surface with a fine emery paper. Replace if necessary.
CAUTION: Use brake fluid to clean.
TORQUE MEMBER
Check for wear, cracks or other damage. Replace if necessary. PISTON Check piston for score, rust, wear or other damage. Replace if necessary.
CAUTION: Piston sliding surface is plated. Do not polish with emery paper even if rust or foreign matter is stuck to sliding surface.
PIN AND PIN BOOT
Check for wear, cracks or other damage. Replace if necessary. Assembly @ Install cup securely in the specified direction.
Adjusting nut SBR849 @ Fit push rod into square hole in key plate. Also match convex portion of key plate with concave portion of cylinder.
Convex portion
SBR893 BR-20
Parts & tools for this job For Nissan 180SX
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Nissan touch up paint
- PARTPanel clip assortmentSearch: Nissan panel clips assortment
As an Amazon Associate we earn from qualifying purchases.