TROUBLE DIAGNOSES - Nissan 180SX S13 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 180SX Nissan 180SX S13 1989 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 180SX S13 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Diagnostic Procedure 1 (Cont'd)
Check whether engine speed is Yes Vibration related to sensor may over 5,000 rpm with vehicle cause A.B.S. operation. stopped. No ¥ Yes Check whether electrical equip- Check front wheel sensor shielded J ment switches are operated. ground. Refer to Ground Circuit Check. No ¥ NG. O.K. Refer to Preliminary Check 4 vy Vv result, Remedy. Replace Go to Self-diagnosis. (See page control BR-45.) unit,
Diagnostic Procedure 2
SYMPTOM: Long stopping distance
Refer to worksheet results.
Check if road condition is Yes Stopping distance may be ¥ slippery with snow or gravel. longer than vehicles which are not equipped with A.B.5. No
Vv. SBR530A Disconnect actuator connector Yes Refer to Preliminary Check 4 and check whether stopping result. distance is still long. Go to Self-diagnosis. (See page BR-45.) No ¥ Perform Preliminary Check 1 and air bleeding.
BR-51
Parts & tools for this job For Nissan 180SX
- PARTBrake padsSearch: Nissan 180SX brake pads
- TOOLBrake bleeder kitSearch: one man brake bleeder kit
- FLUIDBrake fluidSearch: brake fluid
As an Amazon Associate we earn from qualifying purchases.