POWER SUPPLY ROUTING - Nissan 180SX S13 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 180SX Nissan 180SX S13 1989 Workshop Manual
- Section
- General › POWER SUPPLY ROUTING - Nissan 180SX S13 Workshop Manual
POWER SUPPLY ROUTING
POWER SUPPLY ROUTING
Fuse
a. If fuse is blown, be sure to eliminate cause of problem before installing new fuse.
b. Use fuse of specified rating. Never use fuse of more than specified rating.
c. Do not install fuse in oblique direction; always insert it into fuse holder properly.
d. Remove fuse for clock if vehicle is not used for a long period of time. OK. Blown SELS54) Fusible Link A melted fusible link can be detected by visual inspection. If its condition is questionable, use circuit tester or test lamp.
CAUTION: If fusible link should melt, it is possible that critical circuit
a. (power supply or large current carrying circuit) is shorted. In such a case, cafefully check and eliminate cause of problem. Never wrap periphery of fusible link with vinyl tape. Extreme care should be taken with this link to ensure that SEL387L it does not come into contact with any other wiring harness or vinyl or rubber parts.
EL-7
Parts & tools for this job For Nissan 180SX
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
As an Amazon Associate we earn from qualifying purchases.