WIPER AND WASHER - Nissan 180SX S13 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 180SX Nissan 180SX S13 1989 Workshop Manual
- Section
- General › WIPER AND WASHER - Nissan 180SX S13 Workshop Manual
WIPER AND WASHER
WIPER AND WASHER
Wiper and Washer Adjustment (Cont'd) 72 Nozzle ~~ Glass end Nt ZL tt *1: 93 (3.66) Glass end *2: 85 (3.35) “L *3: 38 (1.50) *4: 25 (0.98) Black print end Unit: mr (in)
SELO38M @ Before reinstalling wiper arm, clean up the pivot area as reduce possibility of wiper arm illustrated. This will looseness.
SELO2Z4)
Washer Nozzle Adjustment
@ Adjust washer nozzle with suitable tool as shown in the
figure at left. Details of tool are shown below.
4.5 19.059)
1.5 (0.059) Adjusting hole: L type wrench =
0.9 (0.035)0 x 1.0 (0.039)
0.85 (0.0335) i Unit: mm (in) - Nozzle holes SELOSB!
0.85 (0.0335) SEL2451
Wiper Amplifier Check
Wiper relay
4. Connect as shown in the figure at left. If test lamp comes on when connected to terminal @) and
2. battery ground, wiper relay is normal. Test 12V — lamp sel? fal battery 5] [ | SEL6a1} EL-71
Parts & tools for this job For Nissan 180SX
As an Amazon Associate we earn from qualifying purchases.