Top Cover Assembly - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › Top Cover Assembly - Nissan 240SX 1991-1992 Workshop Manual
Top Cover Assembly
TOP COVER ASSEMBLY
11-5
TOP COVER ASSEMBLY (cont'd)
REMOVE RIGHT AND LEFT SIDE RETENTION CABLES
8.
FROM TOP COVER ASSEMBLY.
Pull cable from top cover pocket.
NOTE: Leave retention cables attached to rear rails.
REMOVE TACK STRIP AND TOP COVER FROM REAR
rial
DRAIN TROUGH ASSEMBLY.
(a) Remove seventeen (17) nuts from tack strip. (b) Pull the tack strip forward while gently pulling inward on the tack strip ends.
MARK TOP COVER LOCATION ON TACK STRIP AND
10.
NS. BACKLITE. (a) Mark tack strip upper edge on the outside while holding top cover material tightly against tack strip. (b) Mark location of top cover right and left window opening edges on backlite material.
REMOVE TOP COVER ASSEMBLY RIGHT AND LEFT SIDE
11.
PANELS FROM TACK STRIP.
Ww. Using a suitable tool, remove staples securing top cover to tack ver frort strip.
REMOVE TOP COVER FROM NO. 4 BOW.
12.
(a) Fold side of top cover material over No. 4 bow to expose al from top cover retainer insert. (b) Slide stay pad tack strip down for No. 4 bow inner retainer removal clearance.
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.