Top Cover Assembly - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › Top Cover Assembly - Nissan 240SX 1991-1992 Workshop Manual
Top Cover Assembly
TOP COVER ASSEMBLY
11-7
TOP COVER ASSEMBLY (cont'd)
DRAW “NEW” TOP COVER ASSEMBLY TACK STRIP
4.
REFERENCE LINE.
Trace cut edge of REMOVED top side panels to NEW top side panels.
TRANSFER NO. 1 BOW REFERENCE LINE TO "NEW" TOP
COVER. Align NEW and REMOVED top cover side flap front edges. Fold REMOVED top cover along reference line and mark NEW top cover.
INSTALL
INSTALL TOP COVER ASSEMBLY TO NO. 4 BOW.
1.
Insert top cover into slot in No. 4 bow and center side to side.
INSTALL NO. 4 BOW TOP COVER RETAINER INSERT.
(a) Position retainer insert to top cover retainer and No. 4 bow. (b) Push the insert into the top cover retainer while holding the top cover in place. (c) Verify top cover centering in No. 4 bow and position of No. 4 bow tack strip.
ALIGN TOP COVER ASSEMBLY RIGHT AND LEFT SIDE
PANELS TO TACK STRIP.
(a) Align edge of top cover rear window opening to pencil mark on backlite. (b) Align tack strip pencil line on top cover with top edge of tack Strip.
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.