Top Cover Assembly - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › Top Cover Assembly - Nissan 240SX 1991-1992 Workshop Manual
Top Cover Assembly
TOP COVER ASSEMBLY
11-10 TOP COVER ASSEMBLY (cont'd)
11. INSTALL TOP COVER ASSEMBLY FRONT RETAINER.
Position retainer to No. 1 bow and secure using six (6) (a) Install front rail weatherstrip retainers (see 3-14) SCrews. (b)
12. TIGHTEN TACK STRIP NUTS.
Tighten tack strip nuts starting in center, then working out toward ends. Torque: 8 Nm (71 in. ib.)
13, INSTALL FOLDING TOP WELL ASSEMBLY.
(a) _ Install well plastic extrusion to tack strip studs and secure using seventeen (17) speed nuts.
Apply Adhesive (3M P/N 051 4135-08031 or equivalent) to (b) body brace panels and well material. Starting in center, align well material with pencil mark on (c) body panels, then work out toward ends.
44. INSTALL HEADLINER ASSEMBLY, (see 10-4).
15. INSTALL BOTH QUARTER TRIM PANELS, (see 5-5).
16. LOWER AND RAISE CONVERTIBLE TOP TWICE. CHECK
FOR WAVES OR WRINKLES IN TOP COVER.
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.