Top Cover Assembly - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › Top Cover Assembly - Nissan 240SX 1991-1992 Workshop Manual
‹ Prev Top Cover Assembly - Nissan 240SX 1991-1992 Workshop ManualNext › Top Cover Assembly - Nissan 240SX 1991-1992 Workshop Manual
Top Cover AssemblyTop Cover Assembly - Nissan 240SX 1991-1992 Workshop Manual
Top Cover Assembly
11-6
TOP COVER ASSEMBLY
TOP COVER ASSEMBLY (cont'd) Pull top cover No. 4 bow inner retainer from top cover (c) retainer.
NOTE: It may be necessary to "start" the retainer from other side of vehicle using a hammer and drift.
REMOVE TOP COVER ASSEMBLY FROM VEHICLE.
13. Pull top cover No. 4 bow retainer from bow assembly and remove top cover from vehicle. ,
NEW TOP COVER PREPARATION
CUT “REMOVED” TOP COVER SIDE PANELS.
1. Following line drawn to indicate tack strip upper edge, cut material away from REMOVED top.
OPEN “NEW” TOP COVER, OUTER SURFACE UP, ON A
2.
LARGE WORK SURFACE.
POSITION “REMOVED” TOP COVER OVER "NEW" ONE,
3.
OUTER.SURFACE UP.
Align rear and side window opening edges of both tops to each /
: other.
‹ Prev Top Cover Assembly - Nissan 240SX 1991-1992 Workshop ManualNext › Top Cover Assembly - Nissan 240SX 1991-1992 Workshop Manual
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.