Workshop Manuals Factory service & repair Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K806 Engine - K1607 Engine - K16 with VVC08 Engine - L Series09 Emission control10 Engine management system - MEMS11 Engine management system - EDC12 Fuel delivery system13 Cooling system - K Series14 Cooling system - L Series15 Manifold & exhaust systems16 Clutch17 Manual gearbox - R6518 Manual gearbox - PG119 Automatic gearbox - CVT20 Automatic gearbox21 Drive shafts22 Steering23 Front suspension24 Rear suspension25 Brakes26 Restraint systems27 Body28 Heating & ventilation29 Air conditioning30 Wipers & washers31 Electrical32 Instruments
Rover 200 Workshop Manual (1995-1999)27 · Body
27 · Body & interior

Luggage compartment trim casing

Make
Rover
Model
200 Workshop Manual
Year
1995–1999
Section
Interior trim components › Luggage compartment trim casing
BodyLuggage compartment trim casing

LUGGAGE COMPARTMENT TRIM CASING

Service repair no - 76.13.53

Remove

Luggage compartment trim casing – Service repair no - 76.13.53
  1. Remove seal from tailgate aperture.
  2. Remove 3 scrivets securing trim casing.
  3. Remove trim casing.

Refit

  1. Fit trim casing and secure with scrivets.
  2. Fit seal to tailgate aperture.

PARCEL TRAY

Service repair no - 76.67.06

Remove

Parcel tray – Service repair no - 76.67.06
  1. Release parcel tray cables from tailgate.
  2. Release parcel tray from support panels.
  3. Remove parcel tray.

Refit

  1. Fit parcel tray and secure to support panels.
  2. Attach parcel tray cables to tailgate.

Parts & tools for this job For 1995 Rover 200

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.