Workshop Manuals Factory service & repair Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K806 Engine - K1607 Engine - K16 with VVC08 Engine - L Series09 Emission control10 Engine management system - MEMS11 Engine management system - EDC12 Fuel delivery system13 Cooling system - K Series14 Cooling system - L Series15 Manifold & exhaust systems16 Clutch17 Manual gearbox - R6518 Manual gearbox - PG119 Automatic gearbox - CVT20 Automatic gearbox21 Drive shafts22 Steering23 Front suspension24 Rear suspension25 Brakes26 Restraint systems27 Body28 Heating & ventilation29 Air conditioning30 Wipers & washers31 Electrical32 Instruments
Rover 200 Workshop Manual (1995-1999)28 · Heating & ventilation
28 · Heating & A/C

Intake air filter

Make
Rover
Model
200 Workshop Manual
Year
1995–1999
Section
Repairs › Intake air filter
Heating & ventilationIntake air filter

INTAKE AIR FILTER

Service repair no - 80.15.42

The intake air filter should be renewed every 12,000 miles (20,000 km) or 12 months, whichever comes first. In hot or dusty climates the filter may require renewing more frequently.

Remove

  1. Remove glove box. See BODY, Interior trim components.
Intake air filter – Remove glove box. See BODY, Interior trim components.
  1. Remove 1 screw and loosen second screw securing glove box support bar to fascia.
  2. Move glove box support bar aside.

Parts & tools for this job For 1995 Rover 200

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.