Automatic gearbox
- Make
- Rover
- Model
- 400 Workshop Manual
- Year
- 1995–2000
- Section
- Torque wrench settings › Automatic gearbox
InformationAutomatic gearbox
AUTOMATIC GEARBOX
’D’ Series
| Fluid pan drain plug | 49 Nm |
| Selector cable adjuster locknut | 7 Nm |
| Selector cable mounting bracket bolts | 9 Nm |
| Selector cable to gearbox bolt | 14 Nm |
| Selector cable cover to gearbox bolt | 22 Nm |
| Selector cable support bracket bolt | 12 Nm |
| Multiplug bracket to gearbox bolts | 12 Nm |
| Engine RH mounting to engine nuts | 64 Nm |
| Engine RH/LH mounting through bolts | 1 74 Nm |
| Engine rear mounting to engine NEW bolts1 | 83 Nm |
| Engine rear mounting to bracket NEW bolts | 58 Nm |
| Engine RH front mounting to gearbox NEW bolts | 64 Nm |
| Engine RH front mounting bracket to body NEW | |
| bolts | 44 Nm |
| Engine LH front bracket bolts | 54 Nm |
1Tighten in sequence
DRIVE SHAFTS
| Drive shaft NEW nut, stake to shaft | 181 Nm |
Parts & tools for this job For 1995 Rover 400
- PARTTransmission filter kitSearch: Rover 400 1995 transmission filter kit
- FLUIDAutomatic transmission fluidSearch: Rover automatic transmission fluid
- TOOLFluid transfer pumpSearch: fluid transfer pump
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.