Brakes
- Make
- Rover
- Model
- 400 Workshop Manual
- Year
- 1995–2000
- Section
- Torque wrench settings › Brakes
InformationBrakes
BRAKES
| Bleed screw - calipers | 10 Nm |
| Bleed screw - rear wheel cylinder | 7 Nm |
| Front caliper carrier mounting bolts | 38 Nm |
| Front disc to drive flange screws | 10 Nm |
| Front caliper guide pin bolts | 27 Nm |
| Front caliper shield bolts | 10 Nm |
| Front caliper banjo bolt | 34 Nm |
| ABS front sensor to hub screw | 6 Nm |
| ABS front sensor harness brackets bolts | 10 Nm |
| Rear caliper shield, bolts | 10 Nm |
| Handbrake lever to body bolts | 22 Nm |
| Handbrake cable brackets bolts | 22 Nm |
| Handbrake cable retaining plate to back plate | |
| bolts | 22 Nm |
| ABS ECU to modulator screws | 8 Nm |
| Modulator mounting spigot | 15 Nm |
| Modulator mounting nuts | 10 Nm |
| ABS ECU pipe unions | 14 Nm |
| Master cylinder to servo nuts | 15 Nm |
| Pipe unions to master cylinder | 19 Nm |
| Brake servo to bulkhead nuts | 13 Nm |
| Brake proportioning valve bracket nuts | 10 Nm |
| Brake proportioning valve pipe unions | 19 Nm |
| Front disc to drive flange screws | 10 Nm |
| Rear disc to hub screws | 10 Nm |
| Rear caliper banjo bolt | 34 Nm |
| ABS rear sensor to adaptor screw | 6 Nm |
| ABS rear sensor cover to hub bolts | 10 Nm |
| ABS rear sensor harness brackets bolts | 10 Nm |
Rear drum brakes
| Rear brake drum to hub screws | 7 Nm |
| Rear wheel cylinder to backplate bolts | 8 Nm |
| Rear wheel cylinder pipe union | 19 Nm |
| Back plate to trailing arm bolts | 64 Nm |
| Brake hose bracket to trailing arm bolt | 22 Nm |
| Vacuum pipe to pump - ’L’ Series | 10 Nm |
| Vacuum pump to alternator - ’L’ Series | 8 Nm |
| ABS sensor adaptor clamp screw | 0.5 Nm. |
Parts & tools for this job For 1995 Rover 400
- PARTBrake padsSearch: Rover 400 1995 brake pads
- TOOLBrake bleeder kitSearch: one man brake bleeder kit
- FLUIDBrake fluidSearch: brake fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.