Suspension
- Make
- Rover
- Model
- 400 Workshop Manual
- Year
- 1995–2000
- Section
- Torque wrench settings › Suspension
InformationSuspension
SUSPENSION
Front Suspension
| Anti-roll bar link nuts | 22 Nm |
| Anti-roll bar clamp to rear beam bolts2 | 22 Nm |
| Damper fork to lower arm bolt2 | 65 Nm |
| Lower arm front pivot bolt2 | 65 Nm |
| Lower arm rear pivot nut1 | 85 Nm |
| Road wheel nuts | 110 Nm |
| Lower arm ball joint nut, align to next hole | 49 Nm |
| Upper arm ball joint nut, align to next hole | 39 Nm |
| Steering arm ball joint nut, align to next hole | 39 Nm |
| ABS sensor adaptor screw | 9 Nm |
| ABS sensor bracket to hub screw | 10 Nm |
| Brake hose bracket bolts | 10 Nm |
| Upper arm bracket to body nuts2 | 65 Nm |
| Damper top mounting nuts | 40 Nm |
| Damper to mounting plate nuts | 30 Nm |
| Damper fork to damper bolt | 45 Nm |
Rear Suspension
| Rear trailing arm compensator adjustment bolt2 | 45 Nm |
| Lower arm mounting to body bolts | 47 Nm |
| Upper arm to trailing arm bolt | 47 Nm |
| Upper arm to body bolts | 78 Nm |
| Compensator arm to trailing arm bolt | 45 Nm |
| Damper to mounting plate, self locking nut2 | 29 Nm |
| Damper mounting plate nuts2 | 38 Nm |
| Lower arm to trailing arm bolts1 | 47 Nm |
| Road wheel nuts | 110 Nm |
| Hub shaft NEW nut - stake to shaft | 181 Nm |
| Trailing arm mounting to body bolts | 78 Nm |
| Handbrake cable bracket to trailing arm bolts | 22 Nm |
1Tighten in diagonal sequence
2Tighten with weight of vehicle on suspension.
Parts & tools for this job For 1995 Rover 400
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTShock absorbersSearch: Rover 400 1995 shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.