Engine - ’t’ series
- Make
- Rover
- Model
- 400 Workshop Manual
- Year
- 1995–2000
- Section
- Torque wrench settings › Engine - ’t’ series
InformationEngine - ’t’ series
ENGINE - ’T’ SERIES
| Engine sump plug | 25 Nm |
| Timing belt tensioner, bolt | 25 Nm |
| Timing belt rear upper cover, bolts | 10 Nm |
| Timing belt cover, bolts | 5 Nm |
| Engine RH mounting to engine, bolts | 105 Nm |
| Engine RH mounting restraint bar, bolts | 45 Nm |
| Engine RH mounting tie bar to body, bolt | 100 Nm |
| Engine RH mounting tie bar to mounting, bolt1 | 100 Nm |
| Crankshaft rear oil seal housing, bolts1 | 10 Nm |
| Engine sump to cylinder block, bolts | 25 Nm |
| Cylinder head bolts;1 | |
| 1st stage1 | 45 Nm |
| 2nd stage1 | 80 Nm |
| 3rd stage | 1 90° |
| Crankshaft cover to cylinder head, bolts | 10 Nm |
| Spark plug cover, screws | 2 Nm |
| Lifting bracket to engine, bolts | 25 Nm |
| Engine LH mounting to body, bolts | 45 Nm |
| Engine LH mounting to gearbox, bolts | 60 Nm |
| Engine LH mounting, bolts | 45 Nm |
| h.t. lead clip plate to cylinder head, bolts | 10 Nm |
| Engine lower tie bar to sump bracket, bolt | 100 Nm |
| Engine lower tie bar to rear beam, bolt | 100 Nm |
| Flywheel to crankshaft, bolts | 110 Nm |
| Crankshaft pulley to timing gear, bolts | 10 Nm |
| Mounting bracket to sump, bolts | 45 Nm |
| Anti-beaming bracket to gearbox, bolts | 60 Nm |
| Anti-beaming bracket to engine, bolt | 45 Nm |
| Oil pressure switch to oil pump housing | 12 Nm |
| Oil pressure relief valve plug | 25 Nm |
| Crankshaft pulley centre bolt | 85 Nm |
| Timing gear to camshaft, bolts | 65 Nm |
| Dipstick tube to engine coolant rail, bolt | 8 Nm |
1Tighten in sequence
Parts & tools for this job For 1995 Rover 400
- PARTEngine gasket setSearch: Rover 400 1995 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.