Clutch
- Make
- Rover
- Model
- 400 Workshop Manual
- Year
- 1995–2000
- Section
- Torque wrench settings › Clutch
InformationClutch
CLUTCH
’K’ Series1
| Pressure plate to flywheel Torx bolts: | 18 Nm |
’L’ and ’T’ Series1
| Pressure plate to flywheel Torx bolts | 26 Nm |
| Clutch release fork to shaft | 29 Nm |
| Clutch slave cylinder mounting bracket to | |
| gearbox bolts | 70 Nm |
1Tighten in diagonal sequence
MANUAL GEARBOX - R65
| Reverse lamp switch | 25 Nm |
| Drain plug, gearbox | 25 Nm |
| Gearbox to engine bolts | 85 Nm |
| LH torque mounting to body bolts | 45 Nm |
| Mounting bracket to gearbox bolts | 80 Nm |
| Gearbox mounting through bolt | 75 Nm |
| Engine rear mounting to engine bolts | 100 Nm |
| Flywheel front cover plate bolts | 9 Nm |
| Flywheel lower cover plate bolts | 9 Nm |
| Filler/level plug, gearbox | 25 Nm |
| Gear selector to body bolts | 22 Nm |
MANUAL GEARBOX - PG1
| Gearbox to mounting plate bolts | 70 Nm |
| Gearbox lifting eye bolt | 25 Nm |
| Gearbox mounting bracket | 60 Nm |
| Gearbox drain plug | 45 Nm |
| Gearbox level plug | 40 Nm |
| Gearchange steady bar to gearbox | 10 Nm |
| Gearbox to mounting plate bolts - ’T’ series | 83 Nm |
| Earth lead to gearbox bolt | 35 Nm |
Parts & tools for this job For 1995 Rover 400
- PARTClutch kitSearch: Rover 400 1995 clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Rover 400 manual gearbox oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.