Workshop Manuals Factory service & repair Rover
Rover Rover 600 Repair Manual - Volumes 1 and 2 - 2nd Edition19 · Supplementary restraint system (SRS)
19 · Body & interior

Caution: (page 2 of 2)

Make
Rover
Model
600 Rover 600 Repair Manual - Volumes 1 and 2 - 2nd Edition
Section
Repairs
Supplementary restraint system (SRS)Caution: · page 2 of 2
  1. Attach the SRS unit cover onto the upper surface of the new SRS unit, and install the SRS unit.
  2. Connect the SRS main harness 18 – P connector to the SRS unit, push it firmly until it clicks into place.
  3. Remove and store the short connectors – RED, then reconnect the airbag 3 – P connectors. Refit the access panel and glovebox.
  4. Reconnect the battery positive cable then the negative cable.
  5. Remove and store the short connectors – RED, then reconnect the airbag 3 – P connectors
  6. After installing the airbag assembly, confirm proper system operation:
    Turn the ignition ON (II); the instrument panel SRS indicator light should come on for about six seconds and then go off.

Parts & tools for this job For Rover 600

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.