Gearbox (page 5 of 7)
- Make
- Rover
- Model
- 600 620 Diesel Repair Manual Supplement
- Year
- 1995–1999
- Section
- Repairs
Manual gearboxGearbox · page 5 of 7
- Remove nut securing LH engine mounting to gearbox bracket.
- Remove 2 nuts securing LH engine mounting to bracket.
- Remove 2 bolts securing mounting bracket to gearbox.
- Remove LH engine mounting.
- Lower gearbox slightly.
- Remove bolt securing gear case to differential housing, position suitable lifting eye, fit and tighten bolt.
- Attach hook of crane to lifting eye and support weight of gearbox.
- Remove remaining 2 bolts securing top of gearbox to engine.
- Release gearbox from locating dowels.
- Using assistance, manoeuvre gearbox away from engine.
- Lower gearbox, disconnect lifting hook and remove gearbox from beneath vehicle.
Parts & tools for this job For 1995 Rover 600
- PARTClutch kitSearch: Rover 600 1995 clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Rover 600 manual gearbox oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.