Contents
- Make
- Rover
- Model
- Coupé, Cabriolet & Tourer 200/400 Coupé, Cabriolet & Tourer Workshop Manual
- Section
- Contents › Contents
Modular engine management system - SPiContents
| Description and Operation | Page |
|---|---|
| MEMS – MPi System components | 3 |
| MEMS – MPi Component locations | 7 |
| MEMS – MPi – Operation | 8 |
| Adjustments | Page |
|---|---|
| Throttle cable adjustment | 1 |
| Repairs | Page |
|---|---|
| Air cleaner – Naturally aspirated models | 1 |
| Air cleaner – Turbo models | 1 |
| Throttle housing – Alloy inlet manifold | 2 |
| Throttle cable | 2 |
| Turbocharger – T16 | 3 |
| Intercooler – T16 | 4 |
| Fuel pressure regulator – Alloy inlet manifold | 5 |
| Fuel rail and injectors – Alloy inlet manifold | 6 |
| Charcoal canister | 8 |
| Purge control valve | 8 |
| Distributor cap and rotor arm | 9 |
| Ignition coil | 9 |
| Camshaft sensor – T16 | 10 |
| Coolant temperature sensor | 10 |
| Crankshaft sensor | 11 |
| Fuel temperature sensor – T16 | 12 |
| Intake air temperature sensor | 12 |
| Knock sensor – T16 | 13 |
| Oxygen sensor – K16 | 13 |
| Oxygen sensor – T16 | 14 |
| Throttle potentiometer – Alloy inlet manifold | 14 |
| Electronic control unit (ECU) | 15 |
| Throttle housing – Plastic inlet manifold | 15 |
| Fuel rail and injectors – Plastic inlet manifold | 16 |
| Throttle potentiometer – Plastic inlet manifold | 17 |
| Stepper motor – Plastic inlet manifold | 18 |
| Data, Torque & Tools | Page |
|---|---|
| Torque settings | 1 |
Parts & tools for this job For Rover Coupé, Cabriolet & Tourer
- PARTEngine gasket setSearch: Rover Coupé, Cabriolet & Tourer engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.