Workshop Manuals Factory service & repair SEAT
01 Power transmission02 Running gear03 Body04 Power tramsmission05 Power unit06 Vehicle electrics07 Heating-ventilation-air conditioning system08 Automatic gearbox09 Engine, mixture preparation10 Engine, mechanics11 Manual gearbox12 Running gear - self diagnosis13 Heating and air conditioning14 Bodywork15 Heating, ventilation, air conditioning system
SEAT Leon Mk101 · Power transmission
01 · Transmission

replace

Make
SEAT
Model
Leon Mk1
Section
Gearbox mechanics,operation, construction,diff. › Gear oil level › replace
Power transmissionreplace
replace
–  Raise the vehicle.
   
–  Remove bolts -1- and - 2- and remove central soundproofing panel.
–  Place below the collecting tray -T20173-.
  A10-10761
–  Unscrew the drain plug and empty the gearbox oil.
  E34-10103
–  Loosen oil level test and filler plug.
–  Screw the oil release control lid and tighten with the appropriate torque → Chapter.
replace – SEAT Leon Mk1  Note
Oil level is correct when the oil reaches the bottom edge of filling hole.
Oil specification for gears → Chapter.
–  Fill with new gear oil up to the correct level.
–  Unscrew control lid, start engine and let the gears work with engaged gear for about 2 minutes.
–  Stop the engine, remove oil cap and check level again, top up if necessary.
–  Screw the oil level and filling control lid and tighten with the appropriate torque → Chapter.
–  Install the middle soundproofing.
  N34-10577

The same page in: Leon Mk2.

Parts & tools for this job For SEAT Leon

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.