Note More information about this topic can be found in → No.138. |
The following components are integrated in the dash panel insert: |
t
| Brake fluid level warning contact -F34- |
t
| Vertical acceleration sender -G90- |
t
| exterior temperature sensor -G17- |
t
| Speedometer sender -G22- |
t
| Oil level/oil temperature sender -G266- |
t
| Coolant temperature gauge -G3- |
t
| Oil pressure warning buzzer -H11- |
t
| Multifunction display -J119- |
t
| control unit on instrument panel -J285- |
t
| Display unit for navigation system -J414- |
t
| Vehicle voltage display -Y11- |
t
| Oil temperature gauge -Y12- |
t
| Selector lever position display -Y6- |
t
| Immobilizer control unit -J362- |
To provide acoustic support to some of the visual displays, the dash panel features a warning buzzer, which is actuated by the control unit. |
All warning lamps are fitted with light-emitting diodes (LEDs). No provision is made for dash panel insert repair. If necessary, the dash panel insert is renewed as a unit → Chapter. |
The data bus diagnostic interface -J533- (Gateway) is an individual control unit option and not part of the dash panel insert, unlike on several other vehicles. |
Fault detection and fault display: |
The dash panel insert is equipped with self-diagnosis, which makes fault finding easier. |
For fault finding, use vehicle diagnosis, testing and information system -VAS 505x- in „Guided fault finding“ mode. |
|
|
|