5.INSTALL PISTON RING SET - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- REASSEMBLY › 5.INSTALL PISTON RING SET - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
5.INSTALL PISTON RING SET
Using a small screwdriver, install a new piston pin hole snap ring on one side of the piston pin hole.

HINT: Be sure that the end gap of the piston pin hole snap ring is not aligned with the service hole cutout portion of the piston.
13011
5.INSTALL PISTON RING SET
a. Install the oil ring expander to the piston by hand.
b.

*a Coil Joint *b Oil Ring Rail End Gap
Using a piston ring expander, install the oil ring rail to the piston.
HINT: Make sure the end gap of the oil ring rail and the coil joint are on opposite sides.
c.

*a No. 1 Compression Ring Code Mark *b No. 2 Compression Ring Code Mark
Parts & tools for this job For Toyota Hilux
- PARTEngine gasket setSearch: Toyota Hilux engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.