6.INSTALL CRANKSHAFT BEARING - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- REASSEMBLY › 6.INSTALL CRANKSHAFT BEARING - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
6.INSTALL CRANKSHAFT BEARING

Using a piston ring expander, install the No. 1 compression ring and No. 2 compression ring to the piston so that the code marks are positioned as shown in the illustration. Code Mark:
| Item | Code Mark |
|---|---|
| No. 1 Compression Ring | G1 or 1G |
| No. 2 Compression Ring | N2 or 2N |
HINT: Install the No. 1 compression ring and No. 2 compression ring with the code mark facing upward.
d.

*1 No. 1 Compression Ring *2 No. 2 Compression Ring *3 Oil Ring Expander *4 Oil Ring Rail *a Front Mark (Arrow)
Position the piston rings so that the ring ends are as shown in the illustration.
NOTICE: Do not align the ring ends.
6.INSTALL CRANKSHAFT BEARING
HINT:
· No. 1 crankshaft bearings have an oil groove and oil hole. No. 2 crankshaft bearings do not.
· There are different types of crankshaft bearings for the No. 1 and No. 5 journal. Therefore, be sure to install crankshaft bearings with the same colors as the ones that were removed. Crankshaft Bearing Color:
| Journal Position | No. 1 Crankshaft Bearing Color | No. 2 Crankshaft Bearing Color |
|---|---|---|
| No. 1 | Silver or Brown | Silver or Brown |
| No. 2 | Silver | Silver |
| No. 3 | Silver | Silver |
| No. 4 | Silver | Silver |
| No. 5 | Silver or Brown | Silver or Brown |
Parts & tools for this job For Toyota Hilux
- PARTEngine gasket setSearch: Toyota Hilux engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.