4.INSPECT EXHAUST VALVE - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- INSPECTION › 4.INSPECT EXHAUST VALVE - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
4.INSPECT EXHAUST VALVE
d. Using a micrometer, measure the diameter of the intake valve stem. Standard valve stem diameter:
5.970 to 5.985 mm (0.2350 to 0.2356 in.) If the intake valve stem diameter is not as specified, check the oil clearance.
e.

*a Margin Thickness
Using a vernier caliper, measure the intake valve head margin thickness. Standard margin thickness:
1.0 to 1.4 mm (0.0394 to 0.0551 in.) Minimum margin thickness:
0.5 mm (0.0197 in.) If the margin thickness is less than the minimum, replace the intake valve.
13715
4.INSPECT EXHAUST VALVE
a. Using a gasket scraper, chip off any carbon from the exhaust valve head.
NOTICE: Be careful not to damage the exhaust valve face.
b. Using a wire brush, thoroughly clean the exhaust valve.
c. Using a vernier caliper, measure the overall length of the exhaust valve. Standard overall length:
99.39 mm (3.91 in.) Minimum overall length:
98.89 mm (3.89 in.) If the length is less than the minimum, replace the exhaust valve.
d. Using a micrometer, measure the diameter of the exhaust valve stem. Standard valve stem diameter:
5.960 to 5.975 mm (0.2346 to 0.2352 in.) If the exhaust valve stem diameter is not as specified, check the oil clearance.
Parts & tools for this job For Toyota Hilux
- PARTExhaust gasketSearch: Toyota Hilux exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
As an Amazon Associate we earn from qualifying purchases.