8.INSPECT CAMSHAFT THRUST CLEARANCE - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- INSPECTION › 8.INSPECT CAMSHAFT THRUST CLEARANCE - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
8.INSPECT CAMSHAFT THRUST CLEARANCE
Lightly press the exhaust valve face against the exhaust valve seat.
HINT: Do not rotate the exhaust valve while pressing the exhaust valve.
c. Check the exhaust valve face and exhaust valve seat.
i. Check that Prussian blue appears around the entire exhaust valve face and that the exhaust valve face is concentric. If not, replace the exhaust valve. ii. Check that Prussian blue appears around the entire exhaust valve seat and that the guide and exhaust valve face are concentric. If not, resurface the exhaust valve seat. iii. Check that the exhaust valve seat contacts the middle of the exhaust valve face with the width between
1.6 to 2.0 mm (0.0630 to 0.0787 in.).
8.INSPECT CAMSHAFT THRUST CLEARANCE
a. Install the No. 2 camshaft and camshaft to the cylinder head sub-assembly.
b.

Using a dial indicator, measure the camshaft thrust clearance and No. 2 camshaft thrust clearance while moving the camshaft back and forth. Standard thrust clearance:
0.060 to 0.200 mm (0.00236 to 0.00787 in.) Maximum thrust clearance:
0.25 mm (0.00984 in.) If the thrust clearance is more than the maximum, replace the cylinder head sub-assembly. If the thrust surface is damaged, replace the camshaft or No. 2 camshaft.
c. Remove the No. 2 camshaft and camshaft from the cylinder head sub-assembly.
9.INSPECT CAMSHAFT OIL CLEARANCE
Parts & tools for this job For Toyota Hilux
- PARTEngine gasket setSearch: Toyota Hilux engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.