6.INSPECT INTAKE VALVE SEAT - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- INSPECTION › 6.INSPECT INTAKE VALVE SEAT - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
6.INSPECT INTAKE VALVE SEAT

Exhaust Side
0.12 mm (0.00472 in.)
If the clearance is more than the maximum, replace the valve and valve guide bush.
6.INSPECT INTAKE VALVE SEAT
a. Apply a light coat of Prussian blue to the intake valve face.
b.

*a Width
Lightly press the intake valve face against the intake valve seat.
HINT: Do not rotate the intake valve while pressing the intake valve.
c. Check the intake valve face and intake valve seat.
i. Check that Prussian blue appears around the entire intake valve face and that the intake valve face is concentric. If not, replace the intake valve. ii. Check that Prussian blue appears around the entire intake valve seat and that the guide and intake valve face are concentric. If not, resurface the intake valve seat. iii. Check that the intake valve seat contacts the middle of the intake valve face with the width between
1.2 to 1.6 mm (0.0472 to 0.0630 in.).
7.INSPECT EXHAUST VALVE SEAT
a. Apply a light coat of Prussian blue to the exhaust valve face.
b.

*a Width
Parts & tools for this job For Toyota Hilux
- PARTEngine gasket setSearch: Toyota Hilux engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.