38261E.pdf - Winch: ELECTRIC WINCH - Toyota Land Cruiser J70 Workshop Manual
- Make
- Toyota
- Model
- Land Cruiser Toyota Land Cruiser J70 Workshop Manual
- Section
- Winch › 38261E.pdf - Winch: ELECTRIC WINCH - Toyota Land Cruiser J70 Workshop Manual
38261E.pdf - Winch: ELECTRIC WINCH

WINCH — Electric Winch WI-37
ELECTRIC WINCH
On-Vehicle Inspection
NOTE: These tests must be performed within several seconds to avoid discharging the battery.
INSPECTION OF NO. 1 MAGNET SWITCH
1,
CONNECT WINCH REMOTE CONTROL SWITCH
2.
TURN IGNITION SWITCH ON
3.
INSPECT NO. 1 MAGNET SWITCH
a voltmeter, check the battery voltage at (a) Using terminal ‘'B’’ of the No, 2 magnet switch. (b) If no voltage, check for voltage and continuity at the connector of the No. 1 magnet switch.
wio06 e Using a voltmeter, check the continuity between the terminals of the wire harness side connector. @ Using an ohmmeter, check the battery voltage between the terminals of the winch side connector.

4.
TURN IGNITION SWITCH OFF
5.
DISCONNECT WINCH REMOTE CONTROL SWITCH
woos
INSPECTION OF NO. 2 MAGNET SWITCH
1.
DISCONNECT BATTERY CABLE FROM NEGATIVE
TERMINAL
2.
DISCONNECT MAGNET SWITCH CABLE FROM
BATTERY POSITIVE TERMINAL
wi0063
3.
REMOVE WINCH MOTOR
Remove the three bolts and motor.
4.
REMOVE MAGNET SWITCH COVER
Remove the four screws and cover.
5.
TEMPORARILY INSTALL WINCH MOTOR
wio0ss
Donated by Onur Azeri . cruisercult.com
Parts & tools for this job For Toyota Land Cruiser
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Toyota Land Cruiser
As an Amazon Associate we earn from qualifying purchases.