REMOVE BASE - Toyota Land Cruiser J70 Workshop Manual
- Make
- Toyota
- Model
- Land Cruiser Toyota Land Cruiser J70 Workshop Manual
- Section
- Winch › REMOVE BASE - Toyota Land Cruiser J70 Workshop Manual
REMOVE BASE

WI-60 WINCH — Electric Winch
(c) Disconnect the base lead wires from the magnet switches, (d) Remove the four screws, stoppers and bracket.

03203 ¢6722
REMOVE BASE

(a) Disconnect the thermo sensor connector. (b) Remove the two bolts and base.
03204
DISASSEMBLY OF WINCH MOTOR
(See page WI-58)
REMOVE COMMUTATOR COVER
1. (a) Remove the two screws and cover. (b) Remove the O-ring.
REMOVE BRUSHES
(a) Using a screwdriver, remove the positive brush from the brush holder. (b) Remove the two screws and positive brushes. (c) Remove the two screws, (d) Using a screwdriver, remove the negative brush from the positive holder.

68708 6705.
REMOVE COMMUTATOR END FRAME
(a) Remove the two bolts. (b) Remove the commutator end frame and O-ring.
REMOVE END FRAME AND ARMATURE FROM
YOKE
8707
Donated by Onur Azeri . cruisercult.com
Parts & tools for this job For Toyota Land Cruiser
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Toyota Land Cruiser
As an Amazon Associate we earn from qualifying purchases.