Rear Brake Caliper Vibration Dampener Replacement (Disc Brakes)

Make

Vauxhall

Model

Astra J

Section

Disc Brakes › Repair Instructions › Rear Brake Caliper Vibration Dampener Replacement

BrakesRear Brake Caliper Vibration Dampener Replacement

Rear Brake Caliper Vibration Dampener Replacement Removal Procedure 1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .            2. Open the cap (2) of the brake caliper vibration damper (1), to gain access to the internal torx.            3. Remove the brake caliper vibration damper (2) from the brake caliper vibration damper stud (1).   Hold against internal torx of damper stud (1). 4. Remove the damper stud (1) from the rear brake. Installation Procedure Caution: Refer to Fastener Caution .            1. Install the damper stud (1) to the rear brake and tighten to 28 N·m (21 lb ft) . 2. Attach the brake caliper vibration damper (2) to the stud (1) by turn in 2 threads ONLY. 3. Tighten the brake caliper vibration damper (2) to 9 N·m (80 lb in) with a suitable tool.            4. Close the cap (2) of the brake caliper vibration damper (1). 5. Lower the vehicle.

07 Brakes